Home \ International \ Magni at Apex 2017
Magni at Apex 2017
27/04/2017
Pubblicato da Redazione
Apex opening date is approaching fast, and Italian Magni T.H. is getting ready for the set up. The company will be present at this fair with his official dealer for Netherland, Germany and Benelux,
Apex opening date is approaching fast, and Italian Magni T.H. is getting ready for the set up. The company will be present at this fair with his official dealer for Netherland, Germany and Benelux, Collè Rentals & Sales. The relationship between the two companies is going on from the very beginning, it can in fact state that Collè was his 1st customer and Magni T.H. is working with him from 2013 with great success for both parties. Collè chose Magni also for its own rental fleet, this makes it very proud as is a strong sign of the quality of his products because being part of one of the biggest rental fleets in Europe is for sure a positive response.
There will be displayed Magni T.H. scissors platform range, currently composed by eight different models of electric platform that can have both hydraulic or electric transmission. These platforms are produced by Chinese manufacturer Zhejiang Dingli Machinery Co. Ltd., with which Magni T.H. currently have a partnership agreement lasting from two years. The aim of this collaboration was the institution of a New European R&D Centre that will make new studies and design a full range of telescopic and articulated aerial work platforms and to appoint Zhejinag Dingli as distributor off Magni T.H. products in China, through its distribution network, and Magni TH as a distributor of Dingli platforms in Europe (UK excluded).
There will also be on display one RTH 5.35S one example of the RTH range that has the peculiarity of a 360° continuous rotation. The models of this range have different working heights from 18 to 46 meters and can be fitted with various type of attachments. The characteristic of being able to change the attachments on the vehicle easily and quickly makes it possible to have a single vehicle that performs three different main functions; for example, telescopic handler when equipped with forks, aerial platform if equipped with basket, or crane if equipped with winch or with jib with winch.
In specific RTH 5.35S has 35 meters of maximum lifting height and a maximum lifting capacity of 5 tons. The design of this machine has been specifically developed to grant the best lifting performance possible: the chassis has been reinforced to resist the strain of a capacity at maximum height (34.7 m) of 2.300kg and also the patented boom design is specific for this: it consists of six elements with two cylinders for extension placed outside the boom itself, and inside there are just hoses and pipes. In this way hoses have more available space to move during extension and retraction of the boom and this avoids accidental breaks.
Another peculiarity of the boom is the way in which it is managed by the software: the first four sections are activated by the cylinder placed on the upper side of the boom and they move proportionally with the chain extension system. The 5th element, which is the biggest and the heavier, is managed by another cylinder placed on the lower side of the boom, which works in a proportional way to the boom angle; this means that the more the angle increases the more the 5th element extends. This extension system has been developed to keep a good load capacity on the wide horizontal reach, otherwise the weight of the 5th element would reduce too much the load capacity of the machine; things are different in the vertical sense instead since in this case the weight remains close to the load center of the machine.
Ultime notizie di Magni Telescopic Handlers
Lifting
11/03/2024
The latest from Magni at Intermat 2024
From 24 to 27 April, Magni will be launching the new TH 3.6...
Lifting
25/01/2024
The new Magni TH 3.6 fixed telescopic handler
Magni will make its official debut on the small fixed telesc...
Lifting
28/06/2022
Magni TH at the service of Italmontaggi
Italmontaggi chooses Magni for the construction of a new str...
Lifting
24/06/2022
RTH 6.35 telescopic handler dealing with a seismosaur
To celebrate its 30th anniversary, the ‘Dinozoo’ prehistoric...
10/12/2020
Magni TH: partnership with Bobcat!
Magni TH will supply Bobcat with rotating telehandlers rangi...
13/03/2019
Magni new headquarters: 2020 inauguration!
A project featuring the Castelfranco Emilia-based company in...
Altri International
International
20/04/2024
Sany Set to Showcase its Green and Latest Products at Intermat 2024
Sany is gearing up to showcase at the Intermat Trade Show 20...
International
19/04/2024
Hitachi presents specially adapted ZX390TC-7 excavator at Intermat
Hitachi Construction Machinery (Europe) NV (HCME) will displ...
International
19/04/2024
XCMG unveiled its premium G2 crane brand
G2 Integrates the whole process of product application, main...
International
18/04/2024
BladeLifter from TII SCHEUERLE is the perfect choice for even the longest rotor blades
The fourth generation SCHEUERLE BladeLifter allows all fleet...
International
18/04/2024
JCB: Stage V Powertrain for large platform Skid Steer Loaders
JCB has launched EU Stage V compliant versions of its large...
International
17/04/2024
Color change signals bold new era at Yanmar CE
Yanmar Compact Equipment is undergoing a shift in its approa...